Filter
Top Products
FP-PG-522 and cFP-PG-522 12 ni.com
Physical Characteristics
Indicators ..........................................Green POWER and
READY indicators, eight
green output state indicators
Weight
FP-PG-522..................................130 g (4.6 oz)
cFP-PG-522................................100 g (3.5 oz)
Power Requirements
Power from network module ............600 mW
Isolation Voltage
Channel-to-channel isolation............No isolation between
channels
Transient overvoltage........................2,300 V
rms
Environmental
FieldPoint modules are intended for indoor use only. For outdoor
use, they must be mounted inside a sealed enclosure.
Operating temperature ......................–40 to 70 °C
Storage temperature..........................–55 to 85 °C
Humidity...........................................10 to 90% RH,
noncondensing
Maximum altitude.............................2,000 m; at higher altitudes
the isolation voltage ratings
must be lowered
Pollution Degree...............................2
Shock and Vibration
These specifications apply only to the cFP-PG-522. NI
recommends Compact FieldPoint if your application is
subject to shock and vibration.
Operating vibration, random
(IEC 60068-2-64)..............................10–500 Hz, 5 g
rms
Operating vibration, sinusoidal
(IEC 60068-2-6)................................10–500 Hz, 5 g