Filter
Top Products
English
5. MAKING USE OF USB (UNIVERSAL SERIAL BUS) 37
5. MAKING USE OF USB
(UNIVERSAL SERIAL BUS)
This monitor provides a hub which supports the USB standard. When connecting to
a USB compliant PC or another hub, the monitor functions as a hub to which the USB
compliant peripherals can be easily connected.
Required system environment
z PC equipped with USB ports or another USB hub connected to the USB compliant PC
z Windows 98/Me/2000/XP // Mac OS 8.5.1 or later
z EIZO USB Cable (MD-C93 enclosed)
NOTE
z The USB hub function may not work properly depending on the PC, OS or
peripherals. Please consult the manufacturer of each device about the USB
support.
z Using the USB Rev. 2,0 compatible PC or peripherals is recommended.
z When the monitor is not on, the peripherals connected to the downstream ports
will not operate.
z Even if the monitor is in a power saving mode or off mode, the devices connected
to the monitor’s USB ports (both the upstream and the downstream) will function.
z The followings are procedures for the Windows 98/Me/2000/XP and Mac OS.
Connecting to the USB HUB
1. Connect the monitor to the PC with the signal cable (see page 12)
first, then turn on the PC.
2. Connect the upstream port of the monitor to the downstream port
of the USB compliant PC or another hub by using the USB cable.
Upstream Ports
To Downstream Ports of the PC or
Another Hub
Upstream port:
Connect the USB compliant PC
or another hub using the USB
cable.