Filter
Top Products
English
16 2. CABLE CONNECTION
2-3. Connecting the Signal Cable
(For the computer employing ADC)
NOTE
z Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
To Input the Signal Through ADC
NOTE
z ADC-DVI display adapter is required if the monitor connects to Power Mac G4/
G5. The adapter is commercially available.
2. Plug the power cord into the power connector on the rear of the
monitor.
Signal Cable Connector of the PC PC
Signal Cable (FD-C39 enclosed)
+ ADC-DVI Display Adapter
(Commercially available)
Video Output Connector ADC
Input Connector (monitor) /
DVI
z Power Mac G4 /
G5 (ADC)
Power Cord