Filter
Top Products
English
2. CABLE CONNECTION 15
5.
Switch on the PC’s power.
The monitor’s power indicator will light up (blue).
If an image does not appear, refer to the “7. TROUBLESHOOTING” (p. 41)
for additional advice.
Whenever finishing your operation, turn off the PC and the monitor.
NOTE
z When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or
Digital) is displayed for a few seconds on the right top corner of the screen.
z Adjust brightness of the screen depending on the brightness of your
environment.
z Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
6. When using the software UniColor Pro or ScreenManager Pro for
LCD (for Windows), connect the upstream port of the monitor to
the downstream port of the USB compliant PC or another hub
with the USB cable.(see
“5. MAKING USE OF USB (Universal Serial
Bus)”(p. 37))
After connecting the USB cable, the USB function can be set up automatically.
For further details about the “UniColor Pro” and “ScreenManager Pro for
LCD”, refer to each User's Manual in the CD-ROM.