Filter
Top Products
25
MB3150-GB
Figure 46
Legend 2 as a passenger seat in a car
Where possible, the wheelchair user should be moved to the passenger seat of
the car and use the car’s seat belt.
The wheelchair can be used as a passenger seat in a car and has been tested in
accordance with ISO 7671/19.
When the wheelchair is used as a passenger seat it should sit facing forward.
The wheelchair must be attached to the fastening system it was tested for;
Unwin WWR/ATF/K/R
User fastening: QIR/3H/ATF/FA/WH
The system is a 4-point fastening system.
The system is a total system that fastens
both the wheelchair and user to the car.
The system requires fastening rails to be
mounted in the car.
Legend 2 has marked off four points
(Figure 46) that must be used when
securing the wheelchair:
• The rear tubing of the side frame,
above the wheel block
• The front tubing of the side frame,
above the bearing housing
When using Legend 2 as a
passenger seat in a car, a neck
support without a link for depth
adjustment should be used.
Handicare relinquishes itself of
all responsibility in the event that
Legend 2 is used as a passenger
seat in a car using a different
fastening system to the one
mentioned above.
Safety in cars