Filter
Top Products
22
B
A
C
A
MB3150-GB
Figure 43
Adjusting the height of the
armrest Figure 39
In order to adjust the height of the armrest,
loosen the screw (39A). Raise or lower
the armrest to the desired position. Refer
to the scale (39B) in order to achieve the
same height on both armrests. The scale
shows the number of centimetres from the
seat to the top of the armrest. Re-tighten
the screw. When the armrest is adjusted to
the desired position, the clothes protector
can be moved in order to avoid openings
to the wheel. Loosen the screw (39C) and
push the clothes protector up or down. Re-
tighten the screw. (The clothing protector
cannot be adjusted on Legend 2 in seat
width 54–60.)
Adjusting the depth of the
armrests Figure 44
Adjust the depth of the armrests by moving
the armrest pads forwards or backwards.
• Loosen the screws (44A) using a 10
mm wrench
• Push the armrest pads forwards/
backwards to the desired position and
tighten the screws
Figure 44
Adjusting the chair