Mitsubishi Electronics A171SH Sleep Apnea Machine User Manual


 
Positioning Control Components of Positioning Control and Their Roles 3
3-5
3.1.3 Setting the acceleration/deceleration time
When the start command is given, acceleration, operation at constant speed and
deceleration are performed for positioning. Set the acceleration time and the deceleration
time in the parameters.
This operation pattern is effective during return to the zero point, positioning and jog
operation.
3.1.4 Backlash correction function
The positioning controller can output excessive pulses, only when the movement direction
is inverted so that the backlash of the mechanical system is corrected.
Table
Feed screw
Backlash
< Backlash correction >