Filter
Top Products
PATENTS PENDING
55
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
8. Push and release the FOLD
switch (FIG. 55-3) to exit
SETUP (FIG. 55-4).
HAND PENDANT:
CHANGING SETUP MODE
FIG. 55-3
MAXON LIFT CORP.
CONTROLLER:
EXITING SETUP
FIG. 55-4
UP
7. To decrease overlap, push the UP
switch from 1 to 5 times (FIG. 55-1).
The FLOOR POS number displayed on
the controller (FIG. 55-2) will increase
by 1 each time you push the UP but-
ton. To close the gap, push the DOWN
switch from 1 to 5 times (FIG. 55-1).
The FLOOR POS number displayed on
the controller (FIG. 55-2) will decrease
by 1 each time you push the DOWN
button.
DOWN
(-)
HAND PENDANT:
CHANGING THE SETTING
FIG. 55-1
FLOOR POS: 350
CONTROLLER:
SETTING FLOOR POSITION
(EXAMPLE READING SHOWN)
FIG. 55-2
FOLD