Filter
Top Products
PATENTS PENDING
51
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
HAND PENDANT:
CHANGING SETUP MODE
FIG. 51-1
HAND PENDANT:
CHANGING THE SETTING
FIG. 51-3
CONTROLLER: SETTING
OUTBOARD RAMP TIME
(RANGE IS -7 TO 10)
FIG. 51-2
OUTBD TIME: 0
3. Push and release the FOLD
switch (FIG. 51-1) to ac-
cess the OUTBD TIME set-
ting (FIG. 51-2).
4. Push the UP switch (FIG. 51-3) to
increase the OUTBD TIME from -7
to 10. Push the DOWN switch (FIG.
51-3) to decrease the number
from 10 to -7.
NOTE: A larger number for the OUTBD
TIME setting allows more time
for the controller to sense the
outboard rollstop is closed. A
smaller number decreases the
time. Call MAXON Technical
Service to advise you about the
best setting for your vehicle.
CONTROLLER:
EXITING SETUP
FIG. 51-4
MAXON LIFT CORP.
5. Push and release the FOLD
switch (FIG. 51-1) two
times to exit SETUP (FIG.
51-4).
FOLD
UP
DOWN