Filter
Top Products
PATENTS PENDING
27
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
INSIDE
OF
DOOR
2. Center the template inside wheelchair door-
way (FIG. 27-1). Line up the outboard
edge of template parallel with inboard edge
of doorway. Maintain center and the clear-
ance dimension shown.
BASE PLATE TEMPLATE CLEARANCE FROM WHEEL-
CHAIR DOOR (TOP VIEW, SIDE DOOR SHOWN)
FIG. 27-1
CENTER
3.75”
VEHICLE BODY
(CUTAWAY)
BASE PLATE TEMPLATE
HOLE PATTERN
1
23
49
BACK
FRONT
5
6
78
10
CAUTION
For vehicles with 48” fl oor height:
If the front edge of Lift base plate is moved more than 3.75” (5” from outside of
body, as shown in FIG. 11-1) away from the inside of the wheelchair door, lower
Lift arms can hit vehicle body before platform reaches the ground. See the
vehicle fl oor levels plotted in FIG. 11-1 and maintain the clearance for the fl oor
level that applies to your Lift installation.