Maxon Telecom WL7-VERS. C-1K Mobility Aid User Manual


 
PATENTS PENDING
52
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
FLOOR POSITION ADJUSTMENT (MANDATORY)
1. Unfold the platform until the
lights illuminate at oor level or
raise the platform to oor level
as shown in FIG. 52-1A.
2. Inspect the threshold plate. The
edge of the inboard rollstop should
line up with the edge of the base
plate as shown in FIG.
52-1B.
EDGE OF
INBOARD
ROLLSTOP
INBOARD ROLLSTOP LINES
UP WITH BASE PLATE
FIG. 52-1B
PLATFORM AT FLOOR LEVEL
(LH SIDE SHOWN)
FIG. 52-1A
THRESHOLD
PLATE
EDGE OF
BASE PLATE
PLATFORM
LIGHT
NOTE: Do the following procedure to ensure the inboard rollstop rests on threshold
plate and lines up approximately with edge of base plate.