Filter
Top Products
PATENTS PENDING
53
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
3. If the inboard rollstop does not line up
correctly with the edge of the base plate
(FIGS. 53-1 and 53-2), go to IN-
STRUCTION 4.
4. Turn power switch OFF (FIG.
53-3).
TURNING POWER SWITCH ON/OFF
(LH PUMP SHOWN)
FIG. 53-3
POWER
SWITCH
CONTROLLER
(REF)
INBOARD ROLLSTOP OVERLAPS
EDGE OF BASE PLATE
FIG. 53-1
INBOARD ROLLSTOP WITH GAP
BETWEEN BASE PLATE
FIG. 53-2
THRESHOLD
PLATE
EDGE OF
BASE PLATE
THRESHOLD
PLATE
EDGE OF
BASE PLATE
NOTE: The power switch on the Lift
must be turned OFF before
entering SETUP.
EDGE OF
INBOARD
ROLLSTOP
EDGE OF
INBOARD
ROLLSTOP