PATENTS PENDING
38
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
15. Press the UNFOLD button on hand
pendant to unfold Lift (FIG. 38-
1). Platform lights will turn on when
platform is at fl oor level.
NOTE: Lift installation is not complete until all the instructions in this manual,
your installation kit instructions, and the checks and adjustments that
follow (in this manual) are completed.
17. Install the remaining bolts, lock nuts, and
under-vehicle supports supplied with
your installation kit. Use the instruction
sheet (Kit item) for information to install
the remaining Kit items correctly.
PLATFORM LOWERED TO
GROUND LEVEL
FIG. 38-2
PLATFORM
OUTBOARD
ROLLSTOP
LIFT AT FLOOR LEVEL
FIG. 38-1
16. Next, press DOWN button on hand
pendant. When the platform reaches
the ground, the outboard rollstop will
automatically open to ramp position
(FIG. 38-2).
PLATFORM LIGHT
(2 PLACES)
GROUND
ROUTE/CONNECT CABLES & HAND PENDANT - Continued