Filter
Top Products
Customer Service 1 800 227-8862 27
3. Read your result
When the meter detects blood in the test strip,
it begins to count down from 5 to 1. Then, your
blood glucose level appears on the display, along
with the unit of measure, and the date and time of
the test. Blood glucose results are automatically
stored in the meter’s memory.
Applying blood and reading results
ƽ
WARNING: If mg/dL does not appear with the test result, call Customer
Service. Use of the wrong unit of measure may cause you to misinterpret
your blood glucose level, and may lead to incorrect treatment.
Error messages
If you get an
ERROR message on your screen rather than a result, see
pages 53–59.
ƽ CAUTION: If you test at the low end of the operating range (43°F) and
your glucose is high (over 180 mg/dL), the reading on your meter may
be lower than your actual glucose. In this situation, repeat the test in a
warmer environment with a new test strip as soon as possible.
DCO_06344501B_OU2_OB_USe.qxd 12/21/05 8:03 AM Page 27