Filter
Top Products
ERROR POSSIBLE CAUSE WHAT TO DO
2. Slide the test strip holder
into the meter until it is
completely inserted.
2. The test strip
holder is not
fully in
place, or
1. Clean; refer to pages 47–51.
1. The meter test
strip holder,
lens area, and
contact points
are dirty, or
Allow the meter to warm or cool
slowly before performing another
test. Do not apply heat or cold to
the meter or test strips.
The meter is
not within the
temperature
range of 10–35°C
(50–95°F).
71
MESSAGES
LSC-99-005 CanSS(RR)OB/Eng 1/5/00 4:03 PM Page 71