Filter
Top Products
11
Next, the meter code will appear
for a few seconds.
Step 2: Check the Code Numbers.
The code number on the test strip
package will range from 1 to 21. If
the number on the display matches
the code number on the SureStep
®
Test Strip package, begin testing. If
the two code numbers do not match,
follow Step 3 to code the meter.
Step 3: Code the Meter.
After the CODE symbol appears,
press the green C button. Continue
pressing until the code number on
the display matches the code num-
ber on the test strip package.
The code is now set for the package
of test strips you are using. The
meter will retain this code until
you change it.
(Example)
(Example)
CODING
(Example)
Green C Button
LSC-99-005 CanSS(RR)OB/Eng 1/5/00 4:02 PM Page 11