Filter
Top Products
Entering Set-Up Mode
1. Make sure the meter is off.
2. Press and hold down the green
C button.
3. Press and release the blue
power button while holding
the green C button.
4. Release the green C button.
Each setting flashes on the display
until you press the blue power button
to move to the next feature. While it
flashes, the setting may be changed by
pressing the green C button. After
the last feature is displayed, the
meter turns off when you press the
blue power button. To move quickly
through the features, press the blue
power button repeatedly or press
and hold it to scroll.
Setting the Time and Date
The SureStep
®
Meter has an inter-
nal clock that will record the time
and date of each test you perform.
You may need to change the time
setting in your meter to have the
correct time and date appear with
your test result. You also will need
to reset the time whenever there
is a change to or from daylight
saving time. (The accuracy of your
55
SETTINGS
Green C Button
Blue
Power
Button
LSC-99-005 CanSS(RR)OB/Eng 1/5/00 4:03 PM Page 55