Filter
Top Products
49
Make sure you thoroughly wipe the
grey area on the inside cover. Wash
both sides of test strip holder base;
carefully clean around the hole. Dry
the test strip holder completely with
a soft cloth or lint-free tissue.
Step 3: Clean the Lens Area and
Contact Points.
Use a cotton swab or a soft cloth
dampened with water to wipe the
lens area and contact points. Be
careful not to scratch the lens area.
Dry with a soft cloth or tissue
that does not contain lint, lotion,
or perfume. Do not use abrasive
materials such as paper towels.
MAINTENANCE
Cover
Top of
Base
Bottom
of Base
Contact Points
Lens Area
Inside Cover
Grey Area
Hole (clean both sides)
Base
LSC-99-005 CanSS(RR)OB/Eng 1/5/00 4:03 PM Page 49