Filter
Top Products
59
Error Messages
The meter gives specific error mes-
sages when it detects a problem with
its internal functions, the test strip,
or the testing procedure. However,
improper use may cause an inaccurate
result without producing an error
message or a symbol. When error mes-
sages appear, note the error number,
turn off the meter, then resolve the
error by following these instructions:
Confirmation
Dot
ERROR POSSIBLE CAUSE WHAT TO DO
1. Blood was applied to 1. Clean the meter. Repeat the test
the wrong side of the with a new test strip, applying
test strip, or blood to the pink test square.
2. Not enough blood is 2. Repeat the test with a new test
on the test strip, or strip. Apply a larger drop of blood
to the pink test square and
verify that the confirmation
dot on the back of the test strip
has turned completely blue.
MESSAGES
Pink
Test
Square
LSI-98-090 SS booklet.B 7/13/98 11:41 AM Page 59