Filter
Top Products
11
Step 2: Check the Code Numbers.
The code number on the test strip
package will range from 1 to 21. If
the number on the display matches
the code number on the SURESTEP
®
Test Strip package, begin testing. If
the two code numbers do not match,
follow Step 3 to code the meter.
Step 3: Code the Meter.
After the
CODE
symbol appears, press
the green C button. Continue pressing
until the code number on the display
matches the code number on the test
strip package.
The code is now set for the package
of test strips you are using. The
meter will retain this code until
you change it.
▼
C Button
(Example)
(Example)
CODING
LSI-98-090 SS booklet.B 7/13/98 11:41 AM Page 11