Filter
Top Products
50
MAINTENANCE
low batteries. If the symbol is flash-
ing, the batteries are dead and you
should replace them immediately.
You will not be able to do
a test when
the symbol is flashing. Replace both
batteries with new AAA alkaline
batteries. Do not use rechargeable
batteries.
Note: Low batteries, dead batteries,
and battery removal will not affect
the test results stored in the memory.
To change the batteries, turn off
the meter and turn it over.
Follow these steps:
Step 1: Remove the Battery Door.
Squeeze the tab and lift up.
L 5037 ZG 00171
®
LSI-98-090 SS booklet.B 7/13/98 11:41 AM Page 50