Filter
Top Products
46
MAINTENANCE
Always clean your meter when this
symbol appears:
If you are concerned that your test
results do not compare with how
you feel, clean the meter and do a
control solution test to check if it is
working properly. Clean the meter
using these easy steps:
Step 1: Remove the Test Strip
Holder.
Press down at the top end (near the
power button) of the test strip holder
and slide it away from the meter.
Step 2: Clean the Test Strip
Holder.
Remove debris from the test strip
holder by wiping gently with a cotton
swab or cloth dampened with water.
LSI-98-090 SS booklet.B 7/13/98 11:41 AM Page 46