Filter
Top Products
19
STEP 2
Apply Sample.
Obtain a drop of blood from your finger
using the PENLET II Automatic Blood
Sampler. When the symbol appears on
the display, touch a small drop of blood to
the white target area of the test strip. Hold
your finger against the test strip until the
meter begins to count down. (If you do
not apply a blood sample within two min-
utes, the meter will turn itself off. You
must remove the test strip and insert it
back into the meter to restart the test.)
STEP 3
Accurate Results in Just 15 Seconds.
Your blood glucose test result will appear
after the meter counts down from “15” to
“1” second. Blood glucose test results are
automatically stored in the meter memory.
Turn the meter off by removing the test
strip.
Record all test results in the Record book.
This helps you keep track of test results.
(Example)
UK PocketScan OB 10/3/00 4:17 PM Page 19