Filter
Top Products
7
STEP 1
Enter the Code Mode.
Start with the meter turned off. Insert a
PocketScan™ Test Strip to turn on the
meter. All segments of the display will
appear followed by the date and time.
Next, the code number will appear on the
display for three seconds.
STEP 2
Match the Code Numbers.
Compare the code number on the meter
display with the code number on the test
strip vial. If the two code numbers match,
you may begin testing. If they do not
match, follow Step 3. When you first use
the meter, three dashes (---) will appear,
showing that there is no code stored in the
memory.
(Example)
(Example)
UK PocketScan OB 10/3/00 4:17 PM Page 7