Filter
Top Products
47
Leica M Stereomicroscopes – Illuminations
Supply (line) lamp 25W
Follow the safety instructions given on
page 7.
̈ Fit the lamp holder and lamp as
described below (incident-light
lamp 6 V/10 W).
̈ Connect the 25 W supply (line)
lamp to the power supply.
̈ Switch on the supply (line) lamp.
̈ Align the light spot with the object
as described.
Coaxial illuminator
• This illuminator is for observing and photographing flat,
highly-reflecting objects such as wafers, integrated circuits
and polished metal sections.
• The coaxial incident light housing fits like an accessory tube
between the optics carrier and the binocular tube, or between
the optics carrier and the phototube (page 50).
• For the MZ7
5 and MZ95, fit the objective
preferably to the spacer ring (10 446 300),
page 32. This will completely illuminate
the largest field of view.
• A quarter-wave plate is required when the microscope
carrier AX is used in the vertical position.
̈ Using the clamping screw, secure the quarter-wave plate to
the objective mount.
̈ Using the knurled ring, turn the quarter-wave plate until the
required effect is obtained.
Please observe the notes on the use of the aperture in the
AX microscope carrier (p. 19).