Filter
Top Products
46
Leica M Stereomicroscopes – Illuminations
Cold light source Leica CLS series
The Leica CLS series is a high-performance line for high light
intensity within the smallest possible space and flicker-free
white light with the lowest possible thermal effect on the ob-
jects. The comprehensive line of accessories enables unlimited
use. The CLS series is produced of antistatic material.
When using the ring lamp (∅ 76 mm) on the planachromatic
objective 0.8× (∅ 80 mm), a special adapter (10 447 078) is
required.
For a detailed information, refer to the user manual Leica CLS.
• The clamp of the fiber-optic light guide cannot be
attached to the microscope carrier AX.
̈ Turn the clamping screw out of the clamp.
̈ Hold the clamp in the opening of the
microscope carrier.
̈ Push the clamping screw through the
holes in the microscope carrier and in
the broader part of the clamp, and screw
it finger-tight to the narrow part of the
clamp.
̈ Insert the fiber-optic light guide into the clamp.
̈ Switch on the power unit.
̈ Align the light spot with the object.
̈ Retighten the clamping screw.
Leica LED illumination
The Leica LED1000 (Laser Emitting Diode) illumination is avail-
able with ring illuminator and/or spot and suitable for routine
tasks with the Leica MS5, MZ6, MZ7
5, MZ95 stereomicroscopes.
LEDs, which do not develop any heat, are used as illuminators.
The color temperature measures 5000 K (daylight).
For details see the separate instructions for use for the LED
illumination.
Fiber-optic
light guide