Filter
Top Products
̈ Secure as described
on page 34.
̈ Secure as described on page 34.
Possible adjustments
̈ Release the clamping lever.
̈ Tilt the instrument.
̈ Retighten the clamping lever.
̈ Set large distances with the larger
knob.
̈ Fine-focus with the smaller (concentric)
knob.
̈ Using the ring on the right-hand drive
knob, adjust the ease of movement
of the drive.
̈ Release the clamping screw.
̈ Raise or lower the
horizontal arm.
̈ Retighten the clamping screw.
Reposition the safety ring (see page 30).
̈ Release the clamping screw.
̈ Pull out or push in the
horizontal arm.
̈ Retighten the clamping screw.
During the sideways movement,
observe the limit stops (see page 30).
̈ Release the clamping screw.
̈ Displace the horizontal arm.
̈ Retighten the clamping screw.
Microscope carrier ➜
drive housing
Optics carrier ➜
microscope carrier
Tilting
Focusing with
coarse/fine drive
Altering the working
distance
Sideways movement
Altering the overhang
31
Leica M Stereomicroscopes – Assembly