Filter
Top Products
Leica ICC50 HD Manual 41
General
Ϙ Keeping all optical components clean is
important for maintaining good optical
performance.
Ϙ Always cover the microscope with the
Leica ICC50 HD camera with the plastic
dust cover (provided with the microscope),
when the instrument is not in use. Be sure
power to the camera is off when the dust
cover is in place.
Ϙ If any optical surface becomes badly coated
with dust or dirt, it should be cleaned by
blowing the surface with a syringe or brush-
ing it off with a camel hair brush before
attempting to wipe the surface clean.
Ϙ Optical surfaces should be cleaned with a
lint-free cloth, lens tissue or a cotton swab
moistened with methanol or commercially
available glass cleaner. Do not use alcohol.
Ϙ It is very important to avoid the excessive
use of solvent. The lint-free cloth, lens
tissue or cotton swab should be moistened
with solvent, but not be wet enough for the
solvent to seep around the lens.
Electrical Considerations
Risk of electric shock. Removing the
covers of the Leica ICC50 HD Camera or
the Stand-alone Kit exposes hazardous voltages,
which if contacted, could cause injury or death.
Please contact an authorized Leica Microsys-
tems dealer for technical service.
Care and Cleaning