Filter
Top Products
Leica ICC50 HD Manual 35
Main menu Submenu
SET DATE TIME
RESET CAMERA PRESS OK
PRESS OK
FLIP IMAGE 0°
OVERLAY NONE
CAM MODE PC-MODE
COLOR
EXPOSURE
RESOLUTION
SETUP CAMERA
SETUP USER
The camera settings enable you to control internal parameters such
as the date or time, update the firmware or reset the camera. You can
also switch the camera from stand-alone to PC mode (or vice versa).
SET DATE TIME
This command sets the date and time as well as the format for display-
ing them. The following formats are available for selection: YYMMDD –
DDMMYY – MMDDYY
RESET CAMERA
This command resets the camera to the factory settings. All user informa-
tion (such as white balance, resolution etc.) is reset.
FLIP IMAGE
Select to flip image 180°.
OVERLAY
Shows the following on the monitor: Leica logo, histogram, date/time and
image counter.
CAMERA MODE
Toggles between the PC and HD modes. You can also toggle between PC
and HD mode by pressing the black button for more than 5 sec until a
message appears on the screen.
SETUP CAMERA (Camera Settings)