Filter
Top Products
Leica ICC50 HD Manual 11
Ϙ The optional remote is not functional when
the camera is in PC mode except for the “i”
button which shows camera information
on the image provided by the HDMI cable.
Ϙ Stand alone SD card capture is not possible
when the camera is in PC mode.
Ϙ Power is provided to the camera via the
USB cable from the computer.
Ϙ If you would like to switch to HD mode,
then close the Leica Imaging Software and
once again power up the camera.
The basics (cont.)
PC Mode – For use with Leica Imaging
Software
Ϙ Upon launching the Leica Imaging soft-
ware, the camera will switch to PC mode
if previously in HD mode or remain in PC
mode if previously in PC mode.
Ϙ The camera provides a selection of image
resolutions (up to 3 megapixels) to the
Computer for use with Leica imaging soft-
ware. The images are in a 4:3 format.
Ϙ In addition to a computer display, the live
image can also be seen via the HDMI cable
on an HD display, but the 4:3 image will be
stretched to fit the 16:9 format and appear
distorted. If you have the ability to change
your display setting to 4:3, you should do
so but note the resolution is not the same
as in HD mode.
Ϙ Images are captured to a folder which you
decide via the software.