Filter
Top Products
30
9. Accessories
Fig. 30 Motorized work table
1 Buttons for height adjustment
2 Adjustable-height feet
9. Accessories
A specially developed work table and correctly
sized work chair allow ergonomically opti-
mized work.
1
2
In addition to various optical accessories, such
as filters and stage scales, a number of different
slide holders can be used.
The work table with motorized height adjust-
ment is designed for optimum ergonomic condi-
tions when working at the comparison macro-
scope.
Its table surface measures 120 cm x 56 cm and it
is mounted symmetrically on the height-adjust-
able column.
Caution:
When setting up the comparison macro-
scope, make sure that the stand is positioned
exactly over the adjustable-height column.
After the power supply is connected, the work
table can be continuously adjusted within a
range of approx. 62 to 92 cm over floor height.
To do so, use the buttons (30.1).
The lifting speed is approx. 12 mm/sec. The lift-
ing capacity is approx. 2000 N.
If the floor on which the work table is installed is
not completely level, differences in level can be
compensated for by screwing the feet (30.2) in
or out.
9.1 Motorized Work Table