Filter
Top Products
25
8. Operation
8.10 The Smart Move* Control Panel
Alternatively, you can connect the Smart Move
control panel.
The Smart Move control panel allows control of
the stage (22.1, 22.2), as well as setting the focus
(22.3).
Use the buttons (23.1 and 23.2) to specify wheth-
er the settings are to apply to the left or right
stage. The synchronous adjustment is activated
using the buttons (23.3).
8.11 Adjusting the Height of the Stand
The rocker switch (21.5) adjusts the height of the
stand individually. This is provided for aligning
the height of objects or object holders which
vary in height.
8.12 Magnification Calibration
For specialized applications, such as calibrating
thermally modified replicas, the magnification of
the right beam path can be changed in the range
of +/-4% relative to the left beam path.
Use the button (24.1) to make this adjustment. To
prevent the setting from being changed acci-
dentally, the button can only be turned while it is
pressed down.
In neutral position, the LED (24.2) is green, i.e.
magnification calibration is activated. Other-
wise, the LED is red.
Caution!
The objective magnifications are accurately
preset at the factory. It is not necessary to cali-
brate the magnification calibration for this pur-
pose.
Fig. 22 Smart Move control panel
1 Movement in y direction
2 Movement in x direction
3 Focus setting
4 Individual setting of the knob height position
Fig. 23 Smart Move control panel buttons
1 Left stage
2 Right stage
3 Synchronous stage adjustment
1
3
1
2
3
4
2
3
21
Fig. 24 Magnification calibration
1 Magnification calibration adjusting knob
2 Control LED