Filter
Top Products
22
8. Operation
8.2 Stages
The stages on the left and right side can be
moved either independently of each other, or
simultaneously in the X and Y directions.
The right stage is positioned using the setting
wheels on the front right (20.5) in the X direction
and on the right side (20.6) in the Y direction.
For the left stage, the setting wheels are,
respectively, at the front left (20.3) and on the
left side (20.2).
To move both stages simultaneously, press the
button (20.10). The LED underneath the button
lights up to indicate that synchronous adjust-
ment is active. In this case, the setting wheels
for the X and Y directions, as well as the focus-
ing handwheel, have the same function on the
left and right side.
Note:
The travel speed of the stages is adjusted to the
magnification setting. When viewed through the
observation tube, the speed always appears the
same when rotating the setting wheel. In fact,
for lower magnification the stage travels faster.
8.3 Tube
Note:
Close any unused tube openings, as otherwise
stray light can interfere with observation.
Adjusting the viewing distance
• Adjust the viewing distance of the eyepiece
tubes so that a congruent total image is seen.
Fig. 20 Control unit
1 Focus (left stage)
2 Adjust in Y direction (left stage)
3 Adjust in X direction (left stage)
4 Adjusting the height of the stand
5 Adjust in X direction (right stage)
6 Adjust in Y direction (right stage)
7 Focus (right stage)
8 Right cold light source
9 Control LED (right cold light source)
10 Synchronous adjustment in X, Y, Z direction
11 Control LED (left cold light source)
12 Left cold light source
37654
1012 8
11 9
12