Filter
Top Products
Leica DM750 P Manual 35
The Leica DM 750 P is equipped with
a time delay shutoff capability, which
automatically turns the illumination off after 2
hours of no changes in the intensity control.
Ϙ The time delay shutoff IS enabled as a
default.
Changing the status of the time delay
shutoff
1. Rotate the intensity control to the lowest
setting.
2. Turn the power on.
3. Rotate the intensity control to full high
intensity, then back to full low intensity all
within 5 seconds.
Ϙ The LED Illumination will flash to indicate
the time delay shutoff status was changed.
Ϙ The LED Illumination will flash two times
slowly then stay on when you disable the
Time Delay Shutoff.
Ϙ The LED Illumination will flash three times
quickly then stay on when you enable the
Time Delay Shutoff.
When you turn the power off and then
turn the power on again, the system will
be in the last Time Delay Shutoff status (Enabled
or Disabled) and you will not see any blinking.
Time Delay Shutoff