Filter
Top Products
Leica DM750 P Manual 25
Basic setup
As a safety precaution, the power cord
has been grounded to the microscope
base. Never use an adapter between the power
cord and the power source; it will render the
grounding feature ineffective.
Work Surface
•
Always use your microscope on a hard,
stable surface.
Power
1. If the power cord is not already attached,
attach it securely to the back of the micro-
scope.
2. Plug the microscope power cord into
a suitable grounded electrical outlet.
A grounded 3-wire cord is provided.
3. Set the illumination control (knob is located
on the bottom left-hand side of the micro-
scope stand) to the lowest setting to start.
The illumination control knob allows you
to adjust the intensity of light produced by
the illumination system.
4. Turn on the microscope using the switch on
the bottom right-hand side of the micro-
scope stand.