Filter
Top Products
SECTION 3—SAFETY INSPECTION
Part No 1148078 21 Crossfire™Series Wheelchairs
❑ Inspect spokes for bent or broken spokes.
❑ Ensure all spokes are uniformly tight.
❑ Clean upholstery and armrests.
❑ Inspect wheel/fork assembly for proper tension by spinning caster; caster should come
to a gradual stop.
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Inspect tyres for flat spots and wear.
❑ If pneumatic tyres check for proper inflation.
❑ Ensure casters are free of debris.
❑ Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Weekly
❑ Ensure wheel locks are easy to engage and prevent the wheels from moving.
❑ Ensure that the casters are free of debris.
❑ Ensure hand grips (if equipped) are not loose.
❑ Ensure quick release axles and camber inserts are clean.
❑ Ensure quick/quad release axles lock properly.
❑ Inspect handrims for signs of rough edges or peeling.
❑ Inspect spokes for bent or broken spokes.
❑ Ensure All spokes uniformly tight.
❑ Inspect wheel/fork assembly for proper tension by spinning caster; caster should come
to a gradual stop.
❑ Inspect tyres for flat spots and wear.
❑ If pneumatic tyres check for proper inflation.
❑ Ensure casters are free of debris.
Inspect/Adjust Monthly
❑ Ensure wheel locks DO NOT interfere with tyres when rolling.
❑ Ensure that the casters are free of debris.
❑ Ensure pivot points are free of wear and looseness.
❑ Inspect upholstery fastening flaps to ensure they securely latch.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Ensure camber bar mounting clamps are securely tightened.