Filter
Top Products
7
REPLACING WHEELS - MODELS
65800 AND 65700 ONLY (FIGURE 16)
NOTE: Refer to INSTALLATION WARNINGS in the
SAFETY SUMMARY in this instruction sheet.
Replacing Front Wheels
1. Remove the mounting screw, bushing and locknut
that secure the EXISTING wheel to the rollator.
2. Remove EXISTING wheel.
3. Install NEW wheel and secure with NEW mounting
screw, bushing and NEW locknut.
Replacing Rear Wheels
1. Remove the mounting screw, bushing, two (2) coved
washers and locknut that secure the EXISTING wheel
to the rollator.
2. Remove EXISTING wheel.
3. Install NEW wheel and secure with NEW mounting screw,
bushing, two (2) coved washers and NEW locknut.
FIGURE 17 - REPLACING THE CRUTCH TIPS -
MODEL 65700 ONLY
Crutch Tip
Rear Frame Tube
REPLACING THE CRUTCH TIPS -
MODEL 65700 ONLY (FIGURE 17)
NOTE: Refer to INSTALLATION WARNINGS in the
SAFETY SUMMARY in this instruction sheet.
WARNING
Model 65700 only - Check crutch tips for rips,
tears, cracks or wear. If any of these conditions
exist, replace crutch tips immediately.
1. Pull to remove the EXISTING crutch tip from the rear
frame tube.
2. Slide the NEW crutch tip onto the exposed end of the
rear frame tube.
Wheel
Locknut
Mounting Screw
Bushing
FRONT WHEELS
FIGURE 16 - REPLACING WHEELS - MODELS
65800 AND 65700 ONLY
Wheel
Locknut
Mounting Screw
Bushing
Coved Washers
REAR WHEELS