Filter
Top Products
3
INSTALLING THE TRAY (FIGURE 4)
NOTE: Refer to INSTALLATION WARNINGS in the
SAFETY SUMMARY in this instruction sheet.
CAUTION
DO NOT sit on the seat with the tray in-
stalled, damage to the tray may occur.
1. Align the four (4) pins on the bottom of the tray
with the four (4) holes in the seat.
2. Push down on tray to secure in place.
FIGURE 4 - INSTALLING THE TRAY
REMOVING/INSTALLING THE BACK
SUPPORT PAD - MODELS 65900,
65800 AND 65700 (FIGURE 5)
NOTE: Refer to INSTALLATION WARNINGS in the
SAFETY SUMMARY in this instruction sheet.
1. Seperate the hook and latch strips and remove the
back pad cover.
2. Remove the EXISTING back pad from the backrest.
3. Slide the NEW back pad over the backrest.
4. Reinstall the back pad cover and secure with hook
and latch strips.
Back Pad
REMOVING/INSTALLING THE
BACKREST - MODELS 65800 AND
65700 ONLY (FIGURE 6)
NOTE: Refer to INSTALLATION WARNINGS in the
SAFETY SUMMARY in this instruction sheet.
Removing the Backrest
1. Depress both the two (2) snap buttons and pull UP to
remove the backrest from the backrest support tubes.
Installing the Backrest
1. Insert the backrest into the two (2) backrest support
tubes.
2. Ensure the two (2) snap buttons fully protrude through
the mounting holes of the backrest support tubes.
FIGURE 6- REMOVING/INSTALLING THE
BACKREST - MODELS 65800 AND 65700 ONLY
Back Pad Cover
Backrest
Hook and Latch
Strips
FIGURE 5 - REPLACING THE BACK SUPPORT PAD
- MODELS 65900, 65800 AND 65700 ONLY
Backrest
Backrest Support
Tubes
Snap Buttons
Pins
Tray
Holes
Seat
NOTE: Model
65800 shown