Filter
Top Products
69
Retaining
Strap Clip
Battery Connections on
Side of Wheelchair Frame
Retaining
Strap
FIGURE 7 - INSTALLING/REMOVING BATTERY BOXES
Front Battery Box
Front of the
Wheelchair
Rear
Battery
Box
Battery Box
Leads
6. If necessary, reinstall the removeable footboard.
Refer to
REMOVING THE REMOVABLE
FOOTBOARD ASSEMBLY FROM THE WHEEL-
CHAIR in PROCEDURE 3 of this Owner's Manual,
part number 1080722.
MWD WHEELCHAIRS
M
W
D
W
H
E
E
L
C
H
A
I
R
S
PROCEDURE 14
BATTERY TRAY (FIGURE 8)
Installing Battery Tray onto Wheelchair NOT
Equipped Weight Shift Basic Tilt
1. If necessary, remove the shrouds. Refer to
REMOV-
ING/INSTALLING SHROUDS - MWD WHEEL-
CHAIRS in PROCEDURE 10 of this manual.
2. Turn the battery tray slightly to one (1) side.
NOTE: Make sure the end of the battery tray labeled
"FRONT" is towards the front of the wheelchair.
3. Position the battery tray pins over the mounting slots
on the hanger brackets.
WARNING
Make sure pins of battery tray are secure in the
mounting slots of the hanger bracket, otherwise
injury or damage may result.
4. Push down on the battery tray to secure in place.
5. Install the battery boxes. Refer to
INSTALLING/RE-
MOVING BATTERY BOXES in this procedure of the
manual.
6. If necessary, install the shrouds. Refer to
REMOV-
ING/INSTALLING SHROUDS - MWD WHEEL-
CHAIRS in PROCEDURE 10 of this manual.
Installing Battery Tray onto Wheelchair
Equipped Weight Shift Basic Tilt
1. If necessary, remove the shrouds. Refer to
REMOV-
ING/INSTALLING SHROUDS - MWD WHEEL-
CHAIRS in PROCEDURE 10 of this manual.
2. Turn the battery tray slightly to one (1) side.
3. Position the battery tray pins over the mounting slots
on the hanger brackets.
WARNING
Make sure pins of battery tray are secure in the
mounting slots of the hanger bracket, otherwise
injury or damage may result.
4. Push down on the battery tray to secure in place.
5. Install the battery boxes. Refer to INSTALLING/RE-
MOVING BATTERY BOXES in this procedure of the
manual.
6. If necessary, install the shrouds. Refer to
REMOV-
ING/INSTALLING SHROUDS - MWD WHEEL-
CHAIRS in PROCEDURE 10 of this manual.
Removing
1. If necessary, remove the shrouds. Refer to
REMOV-
ING/INSTALLING SHROUDS - MWD WHEEL-
CHAIRS in PROCEDURE 10 of this manual.
2. Remove the battery boxes from the wheelchair. Re-
fer to
INSTALLING/REMOVING BATTERY BOXES
in this procedure of the manual.
3. Lift up on the battery tray to release the battery tray
pins from the mounting slots on the hanger brack-
ets.
4. Turn the battery tray slightly to one (1) side.
5. Remove the battery tray from the wheelchair.