4
SPECIFICATIONS
S
P
E
C
I
F
I
C
A
T
I
O
N
S
SPECIFICATIONS
PERFORMANCE R2
BASIC
R2
250 series
R2
STANDARD
Speed (M.P.H.): 0 to 3.8 0 to 3.6 0 to 5.8
Turning Radius: > 23-inches > 23-inches > 23-inches
Range (variable)
4
: 18-22 miles 12-14 miles 18-22 miles
L Weight Limitation
5
: 250 lbs. 250 lbs. 300 lbs.
L
NOTE: Refer to PERCENTAGE OF WEIGHT DISTRIBUTION in PROCEDURE 1 of this manual.
NOTE: All specifications are
approximate.
RANGER II MWD - R2
BASIC
R2
STANDARD
R2
250 SERIES
Seat Width Range:
Seat Depth Range:
Back Height Range
Std.:
Opt. Headrest:
Opt. Backrest Ext.:
Back Angle Range:
Seat-to-Floor:
Overall Width (No joystick):
Overall Height:
Weight
3,6
W/O Batteries:
W/Batteries (Gel Cell):
Shipping:
Armrests:
Upholstery:
INTEGRATED SLING SEAT
16, 18 or 20-inches
16, 17 or 18-in. - in 1-inch increments
(17 and 18-in. by extension)
16, 17, 18, 19 or 20-in. - In 1-in increments
N/A
N/A
90
o
to 105
o
- in 5
o
increments
18-1/4-inches
24-7/8-inches
34-3/8-in. - 18-in. Back Height
R2
BASIC
/ R2
250 series
R2
STANDARD
110 to 114 lbs. 112 to 116 lbs.
178 to 182 lbs. 190 to 194 lbs.
134 to 153 lbs. 146 to 155 lbs.
Removable, Flip Back, Fixed or Adjustable
Height - Desk and Full Length
Black Nylon
CAPTAIN'S SEAT
BACK TYPE
LOW LOW SOLID SEAT HIGH
1
(LOB) (LOBSS) (HIB)
19-in. 19-in. 19-in.
17-in. 17-in. 17-in.
16-in. 18-in. 22-in.
N/A N/A 28-in.
23-in. N/A N/A
(55
o
- 114
o
)
2
(98
o
)
2
(35
o
- 170
o
)
2
22-in. 19-1/2-in. 22-in.
24-3/4-in. 24-3/4-in. 24-3/4-in.
35-in. 35-in. 39-in.
R2
BASIC
/ R2
250 series
R2
STANDARD
131 to 135 lbs. 138 to 142 lbs.
206 to 210 lbs. 213 to 217 lbs.
161 to 165 lbs. 168 to 172 lbs.
Flip Back - Adjustable Height - Full Length (Std.)
Vinyl or Cloth with Vinyl (R2
250 SERIES
- Gray fabric
trimmed w/ gray Vinyl)
INTEGRATED SLING SEAT AND CAPTAIN'S SEAT
43-1/2-inches 35-1/2-inches
(With 8-in. rear casters (With 8-in. rear casters
and 93 front riggings) and no front riggings)
7-inch Urethane
12-1/2 x 2-1/4-in. (Std.); 14-in.x 3-in. (Opt.) (Flat Free or Pneumatic)
8 x 1-3/4-in. Semi Pneumatic (Std.), 8 x 2-in. Pneumatic (Opt.)
6 x 2-in. Semi Pneumatic (Opt.)
Swingaway, Removable Adjustable Flip Up Removable Footboard
R2
BASIC
/R2
STANDARD
- 22NF Gel Cell (Two (2) Required); R2
250-SERIES
uses
- U1 GEL CELL)
Overall Length (Drive wheel in Front
Position -
Refer to PERCENTAGE OF
WEIGHT DISTRIBUTION in PROCEDURE
1 of this manual.)
Front Stabilizers
Drive Wheels/Tires:
Casters w/Precision Sealed Bearings:
Footrest/Legrest:
Battery/Size (Not Supplied):
Footnotes:
1. High Back not available on model R2
250 SERIES
.
2. Low and High Back Types have an Infinite adjustment.
Low Backs with Solid Seat have no adjustment.
3. 18-in. wide x 16-in. deep wheelchair with MKIV RII
electronics.
4. Range will vary with battery conditions, surface, ter-
rain and operators weight.
5. Includes seating systems and accessories.
6. Weight varies between motors. R2
BASIC
AND
R2
250 SERIES
have clutches. The R2
STANDARD
has
motor locks.