Invacare Ranger IIBASIC Wheelchair User Manual


 
45
9. Install the battery box(es) into the wheelchair. Refer
to
INSTALLING/REMOVING BATTERY BOX(ES) in
the PROCEDURE 13 - FWD MODELS or PROCE-
DURE 14 - MWD MODELS of this manual.
NOTE: New Battery(ies) MUST be fully charged BEFORE
using, otherwise the life of the battery(ies) will be reduced.
10. If necessary, charge the battery(ies). Refer to
CHARGING BATTERIES in the PROCEDURE 13 -
FWD MODELS or PROCEDURE 14 - MWD MOD-
ELS of this manual.
DETAIL B
NOTE: Battery clamps exploded away for clarification purposes only.
Mounting Plate
FIGURE 6 - CONNECTING BATTERY CABLES - BATTERY CLAMP METHOD
CONNECTING BATTERY CABLE(S) TO BATTERY(IES) TERMINAL(S)/POST(S)
CONNECTING BATTERY CABLE(S) TO BATTERY(IES) TERMINAL(S)/POST(S)
Hex Screw
Negative (-) BLACK
Battery Cable
Positive (+) RED
Battery Cable
Battery Clamp
POSITIVE (+) Battery Terminal/
Post and Battery Clamp
NEGATIVE (-) Battery Terminal/
Post and Battery Clamp
Positive (+) RED
Battery Cable
Negative (-) BLACK
Battery Cable
Group 22NF Battery
POSITIVE (+) Battery
Terminal/Post
Mounting Plate
Group 22NF Battery
NEGATIVE (-) Battery Terminal/Post
TOP VIEW
EXPLODED
VIEW
RED Battery Clamp Cover
NEGATIVE (-) Battery
Terminal/Post
Tie-Wrap
BLACK Battery Clamp Cover
Group 22NF Battery
Tie-Wrap
POSITIVE (+) Battery
Terminal/Post
PROCEDURE 12BATTERIES
B
A
T
T
E
R
I
E
S
DETAIL "A"
Fuse
Box
Fuse Box placement
when box top
is installed