Filter
Top Products
SECTION 11—BATTERIES
P9000
™
XDT 54 Part No. 1118386
FIGURE 11.6 Connecting Battery Cables
Perform one (1) of the following methods for connecting the battery cable(s):
• Dual U1 Batteries - Use direct mount method described on page 54. Refer to
FIGURE 11.7.
• Dual Group 22NF Batteries with Mounting Holes in the Terminal(s)/Post(s) - Use
direct mount method described on page 54. Refer to FIGURE 11.7.
• Dual Group 22NF Batteries without Mounting Holes in the Terminal(s)/Post(s) - Use
battery clamp method described on page 57. Refer to FIGURE 11.8 and FIGURE 11.9.
Direct Mount Method
NOTE: For this procedure, refer to FIGURE 11.7.
1. Install battery terminal cap(s) onto battery cable(s):
A. Dual U1 Batteries
i. ORANGE battery terminal cap onto RED battery cable.
ii. GREY battery terminal cap onto BLACK battery cable.
B. Dual Group 22NF BATTERIES
i. RED battery terminal cap onto RED battery cable.
ii. BLACK battery terminal cap onto BLACK battery cable.
NEGATIVE (-)
Terminal/Post and Clamp
DO NOT USE
POSITIVE (+) Terminal/Post
(Note position of clamp)
Group 22NF Batteries
U1 Batteries
DO NOT USE
POSITIVE (+) Terminal/Post
(Note position of clamp)
POSITIVE (+)
Terminal/Post
NEGATIVE (-)
Terminal/Post
POSITIVE (+)
Terminal/Post
NEGATIVE (-)
Terminal/Post
NEGATIVE (-)
Terminal/Post and Clamp