Filter
Top Products
SECTION 7—ARMS
P9000
™
XDT 38 Part No. 1118386
SECTION 7—ARMS
ƽ WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that on/off switch
on the joystick is in the off position.
Adjusting Armrest Height
ƽ WARNING
Make sure the height adjustment lever is in the locked position before using the
wheelchair.
NOTE: For this procedure, refer to FIGURE 7.1.
1. Unlock the armrest by flipping the height adjustment lever on the top front of the
armrest to the up (horizontal) position.
2. Adjust armrest to one (1) of five (5) positions.
NOTE: Height adjustment lever MUST be in the unlocked position when placing armrest into the
arm assembly.
3. Lock the armrest by pressing the height adjustment lever into the down (vertical)
position when the desired armrest height is achieved.
4. Repeat STEPS 1-3 for other armrest.
FIGURE 7.1 Adjusting Armrest Height
Locked
(Vertical)
Unlocked
(Horizontal)
Height Adjustment Lever
Armrest