Filter
Top Products
Power Tilt Only For M71 And M91. 18 Part No.1118362 Rev A
NOTE: Refer to the wheelchair owner's manual for complete mechanical and electrical troubleshooting
guides on the base.
NOTE: Refer to the individual CONTROLLER MANUAL supplied with each wheelchair for additional
troubleshooting information and explanation of error codes.
Wheelchair Power ON but
does not drive.
Seating system not functioning.
System tilted beyond drive lock-
out angle.
Low Batteries.
Faulty electrical connection.
Blown Fuse.
SYMPTOM PROBABLE CAUSE SOLUTIONS
Tilt to neutral (upright)
position. Contact Dealer/
Invacare for Service.
Charge batteries.
Check all connections.
Replace fuse.
TROUBLESHOOTING
SECTION 2
GENERAL GUIDELINES
SAFETY INSPECTION/TROUBLESHOOTING
TROUBLESHOOTING