Filter
Top Products
Part No. 1118362 Rev A 17 Power Tilt Only For M71 and M91.
SAFETY INSPECTION CHECKLIST
This Procedure Includes the Following:
Safety Inspection Checklist
Troubleshooting Guide
SAFETY INSPECTION/TROUBLESHOOTINGPROCEDURE 2
NOTE: Every six (6) months or as necessary take your wheelchair to a qualified dealer for a thorough
inspection and servicing. Regular cleaning will reveal loose or worn parts and enhance the smooth
operation of your wheelchair. To operate properly and safely, your wheelchair must be cared for just
like any other vehicle. Routine maintenance will extend the life and efficiency of your wheelchair.
TROUBLESHOOTING
SAFETY INSPECTION
ITEM INITIALLY INSPECT/ INSPECT/
ADJUST ADJUST
MONTHLY PERIODICALLY
ELECTRICAL CONNECTIONS
l Make sure all electrical connections are secure. X X
l Check limit switch position. X X
DRIVE LOCK-OUT
l Make sure drive lock-out operates properly. X X
TILT MECHANISM
l Make sure actuator operates smoothly and
properly. X X
l Make sure actuator mechanism and tilt tracks are
clean. X X
CLOTHING GUARDS
l Ensure all fasteners are secure. X X
ARMS
l Secure but easy to release; adjustment levers
engage properly. X X
l Adjustable height arms operate and lock securely. X X
ARMRESTS
l Inspect for rips in upholstery. X X
l Armrest pad sits flush against arm tube. X X
SEAT AND BACK CUSHIONS
l Inspect for rips. X X
CLEANING
l Clean cushions and armrests. X X
Initial adjustments should be made to suit your personal body structure and preference.
Thereafter follow these maintenance procedures.
NOTE: Refer to the wheelchair owner's manual for a complete safety inspection checklist on the base.