Filter
Top Products
5
INSTALLING THE BACK J BRACKETS (FIGURE 3)
1. Position the ContourU back between the back canes to determine the approximate
mounting position of the J brackets to obtain the desired depth.
2. Align two (2) of four (4) mounting holes of the J bracket with two (2) of five (5) mounting
holes on the L bracket as shown in FIGURE 3.
3. Using two (2) mounting screws and locknuts, secure the J bracket to the L bracket. Se-
curely tighten mounting hardware.
4. Repeat STEPS 2-3 with three (3) remaining brackets.
Locknuts
Mounting Screw
J Bracket
ContourU Back
L Brackets
Mounting Holes
FIGURE 3 - INSTALLING THE BACK J BRACKETS