Filter
Top Products
11
INSTALLING THE SEAT L BRACKETS (FIGURE 8)
NOTE: When mounting the L brackets to the wood backed ContourU seat the L brackets may be reversed
to allow for a wider range of seat height adjustments and shown in DETAIL A of FIGURE 8.
1. Position the ContourU seat between the seat rails and determine the mounting positions
for the four (4) L brackets and seat depth.
2. If mounting L bracket to a pan seat, pull to remove the ContourU cushion from the seat
pan.
3. Align L bracket with the edge of the ContourU seat and two (2) desired mounting holes as
shown in FIGURE 8.
4. Perform one (1) of the following:
A. SEAT PAN: Using a backing plate and two (2) mounting screws, secure the L bracket to
the seat pan back.
B. WOOD BACKED SEAT: Using two (2) mounting screws secure the L bracket to the
wood backing of the seat cushion.
5. Repeat steps 3-4 for remaining three (3) L brackets.
6. If mounting L bracket to a seat pan, reinstall the ContourU cushion onto the seat pan.
Backing Plate
Mounting
Screws
WOOD BACK
PAN BACK
Mounting
Holes
Edge of the
ContourU Seat
NOTE; ContourU
cushion not shown
L Bracket
Mounting
Screws
Mounting
Holes
Edge of the
ContourU Seat
L Bracket
Mounting Screws
Mounting
Holes
L Bracket
(Reversed)
DETAIL "A"
FIGURE 8 - INSTALLING THE SEAT L BRACKETS