Filter
Top Products
12
INSTALLING THE SEAT J BRACKETS (FIGURE 9)
1. Position the ContourU seat between the seat rails to determine the approximate mounting
position of the J brackets to ensure the appropriate height setting.
2. Align two (2) of four (4) mounting holes of the J bracket with two (2) of five (5) mounting
holes on the L bracket as shown in FIGURE 9.
3. Using two (2) mounting screws and locknuts, secure the J bracket to the L bracket. Se-
curely tighten mounting hardware.
4. Repeat STEPS 2-3 with three (3) remaining J brackets.
5. Install the ContourU seat. Refer to
INSTALLING/REMOVING THE CONTOUR U SEAT-
ING SYSTEM SEAT in this instruction sheet.
6. Position the user into the wheelchair to determine If seat height adjustments are needed to
properly fit the ContourU seat to the user. Refer to the wheelchair owner's manual.
Locknuts
Mounting
Screw
J Bracket
ContourU Back
L Brackets
Mounting Holes
FIGURE 9 - INSTALLING THE SEAT J BRACKETS