Support User Manuals

Invacare GET-U-UP LIFT Mobility Aid User Manual

Open as PDF

of 32

MAINTENANCE

Part No. 1148115 29 Get-U-Up

™

Lift

Theconnectionbetweenthemastandthebaseshouldbecleanedandcoatedwith

petroleumjellypriortoassembly.

Detecting Wear and Damage

Itisimportanttoinspectallstressedparts,suchasslings,slingattachmentknobs,andany

pivotforslingsforsignsofcracking,fraying,deformationordeterioration.Replaceany

defectivepartsimmediatelyandensurethattheliftisnotuseduntilrepairsaremade.

Allslingmetalpartsshouldbeinspected

everythreemonthsandifwearisapparent,

replacementmustbemade.

Checkthatalllabelsarepresentandlegible.Replaceifnecessary.

Cleaning the Sling and the Lift

Theslingshouldbewashedregularlyinwatertemperatureof180°F(82°C)anda

biologicalsolution.Asoftcloth,dampenedwithwaterandasmallamountofmild

detergent,isallthatisneededtocleanthelift.Theliftcanbecleanedwithnon‐abrasive

cleaners.

Replacing the Knee Pad

NOTE:Forthisprocedure,refertoFIGURE 8.2.

1. Removethefourbuttonscrewsandwashersthatsecureexistingkneepadtothelift.

2. Removetheexistingkneepadfromthelift.

3. Positionthemountingholesinthenewkneepadwiththemountingholesinthelift.

4. Usingtheexistinghardware,securethenewkneepadtothelift.

FIGURE 8.2 Replacing the Knee Pad

Adjustment Pin

(1 of 2)

Knee Pad

Button Screw and

Washer (1 of 4)

previous next