Filter
Top Products
TROUBLESHOOTING
Get-U-Up
™
Lift 26 Part No. 1148115
SECTION 7— TROUBLESHOOTING
NOTE:Ifproblemsarenotremediedbythesuggestedmeans,pleasecontactyourdealeror
Invacare.
SYMPTOMS FAULTS SOLUTION
Stand up lift feels loose. Mast/base joint loose.
Tie-rods are loose.
Tighten the bolt, washer and locknut that secure
the mast to the base.
Refer to Assembling the Base, Mast and Horn
Assembly on page 10.
Casters/brakes noisy or stiff. Fluff or debris in bearings. Refer to Hydraulic Pump
on page 28.
Noisy or dry sound from pivots. Needs lubrication. Refer to Hydraulic Pump
on page 28.
Lift arms will not lower in upper-
most position.
Lift arms require a minimum
weight load to lower from the
uppermost position.
Pull down slightly on the lift arms.